JACKING

ALSO CHECKOUT OUR NEW WEBSITE WWW.FIRSTFOUR.CO.UK

REMEMBER - ALL PRICES INCLUDE VAT

can_ani_icon.gif (10370 bytes)

High-Lift Jacks and Accessories
The high-lift jack must be the most versatile piece of off-road equipment that you can buy. We supply the genuine Jackall (BELOW) and Hi-Lift jacks along with the ranges of useful accessories. The Jackall jack along with the range of accessories is still the only high-lift jack which has NATO codification and is shortly to also have TUV approval. But the ever popular Hi-Lift is still favoured by many people for its dependability and simple no-nonsense design. The choice is yours! see below for information on both types.

AVAILABLE IN 4' & 5' SIZES
Specifications

Approximate weight 30 lbs. (14 kg).

4,660 lbs ( 2113.74 kg) rated capacity.

Climbing pins of specially processed steel with 125,000 PSI tensile strength and 100,000 PSI yield.

Steel bar is manufactured of specially rolled extra high carbon steel with 80,000 pound minimum tensile and carbon .69 to .82.

Steel handle of 14 gauge high-yield structural tubing with minimum yield of 55,000 PSI.
1 5/16" diameter x 30" long.

Features

	Every jack comes complete with adjustable top clamp clevis for use in clamping and winching.
	Safety bolt is designed to shear at 7,000 lbs. (3175 kg).
	For speedy disengaging, lifting unit automatically drops away when load is removed.
	4 1/2" (11 cm) long lifting nose for positive contact with load.
	Steel bar can be reversed for extra long life.
	Low pickup of 4 1/2" (11 cm).
	28 square inch base plate 4 foot £48 5 foot £54 Remember, a 5' Jack can seem ideal if you are going to use it occasionally as a winch, as you will have 25% extra length to use. But you will reduce your stowage options in the vehicle.

The Hi-Lift® X-TREME is the impressive new "top of the range" all-cast 48" model with special features that include, charcoal metallic powder-coat finish, gold zinc-plated hardware and handle, and a special top winch-clamp-spreader attachment.

Charcoal Metallic Powder-Coat Finish-provides a unique look that separates it from the standard Hi-Lift.

Gold Zinc-Coat Hardware-all the hardware, the unique winch-clamp-spreader attachment, and the handle are gold zinc-coated to ensure rust resistance from extreme use.

Unique Winch-Clamp-Spreader Attachment-replaces to clamp-clevis of standard Hi-Lift®
Winch, clamp, or spread up to 5,000 lbs.
One position for all winching, clamping, and spreading positions. £69.75

In place of the standard top clamp, the X-Treme Jacks come standard with a unique Winch-Clamp-Spreader attachment for clamping and spreading with the Jack, as well as greatly facilitating manual winching by accepting 19mm Bow Shackles, 10mm Choker Chains for rigging. The Winch-Clamp-Spreader is rated to beyond the loading rating for the Hi-Lift Jack. If the Hi-Lift can handle the load, so can the Winch-Clamp-Spreader.

Jack Adapter (for Hi-Lift). The Jack Adapter is fitted to the jack to enable it to fit the jacking holes on 90/110 Defender and the jacking tubes on our Range Rover, Discovery jacking/recovery points and Replacement Bumpers or Discovery Replacement Jackable Sills. £23.

Galvanized Jack Adapter with bolt & wing nut

The Hi-Lift Off-Road Base Jack Base is manufactured from ultra-tough GRP. this super-tough square base will not rot like plywood, and is capable of handling the most extreme use, it is ideal the ideal long term solution for safely supporting the jack and preventing it from sinking into soft ground. . £26.

Hi-Lift Jack Base

The Hi-Lift LOC-RAC. A convenient mounting and locking device for storage of your Hi-Lift Jack. Installation is simple. It can be mounted horizontally or vertically, with or without a Jack Protector. Your Hi-Lift Jack is mounted in the Loc-Rac to deter theft. It also places the Jack in an easy to reach location. The Loc-Rac is manufactured of high-quality steel. The lock is included. £24.

The Hi-Lift 4XRAC is designed for serious off-roaders who are looking for an easy, inexpensive way to stow their Hi-Lift Jack in a convenient, secure location. £24.

	1/8" steel construction holds up under the strain of off-road travel
	A padlock can be placed through a hole in the carriage bolt.
	All mounting hardware and instructions are included (some drilling required)
	Mounting brackets are slotted for adjustment.
	Velcro handle strap secures handle to jack bar.
	Each kit contains 2 mounting brackets, 2 mounting bracket caps, a Velcro strap for securing the Hi-Lift's handle and all necessary mounting hardware.

Hi-Lift 4XRAC Mounting Rack £24. Hi-Lift LOC-RAC Mounting Rack £24.

Maintenance Kit. The genuine Hi-Lift FIX-IT-KIT spares kit which contains all the wearing parts from the 4' or 5' Jack. £18

Hi-Lift FIX-IT-KIT Maintenance Kit

Jack Tiger Hi- Lift 8000#

The 4’ Jackall Jack can be used on the vehicle for jacking to simply change a wheel, to place stones It is under a wheel to improve traction, or ‘casting’ the vehicle out of ruts, and even as a short-pull winch. The Jackall's versatility means it can be used for a variety of jobs including easy fence post removal, a workshop hoist, or even a spreader or a cramp. £48.

A workshop hoist Removing fence posts Getting a tyre bead off the rim

Jack Adapter (for Jackall). The Jack Adapter is fitted to the jack to enable it to fit the jacking holes on 90/110 Defender and the jacking tubes on our Range Rover and Discovery jacking/recovery points. £19.

Galvanized Jack Adapter with bolt & wing nut

Rear Lifting Adapter. Manufactured from 10mm thick steel and galvanized, this useful accessory fits between your 50mm Towing Ball and the towing bracket. This enables the vehicle to be high-lift jacked with the use of the Jack Adapter. Suitable for most vehicles. £19

Galvanized Rear Lifting Adapter

Jack Handle Retainer. Simple solution for holding the jack handle in the upright position for storage.
£ 4.25 each

Jack Handle Retainer for Hi-Lift Jack (not available for Jackall) *(model without rubber handle sleeve)

RETURN TO TOP